User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Keithley 580
DATE:                  30-Nov-94
AUTHOR:                User Contributed
REVISION:              1.0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       8
NUMBER OF LINES:       59
CONFIGURATION:         Fluke 5700A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  HEAD         Keithley 580 Calibration Procedure
  1.004  DISP         Connect a 100 m[234] 0.01% standard resistor
  1.004  DISP         to the UUT in 4-terminal configuration.
  1.004  DISP
  1.004  DISP         Set the front panel switch on the UUT to OPR
  1.005  IEEE         [SDC]
  1.006  IEEE         G1XD1XC0XR0XP0XT3XX
  1.007  ACC          100.00MZ       0.01%
  1.008  IEEE         [D200][TRIG][I]
  1.009  MEM*         1000
  1.010  MEME
  1.011  MEMC   200   mZ             0.04% 0.03U
#!          Test Tol 0.07, Sys Tol 0.01, TUR 7.000 (>= 4.00).
  2.001  DISP         Set the front panel switch on the UUT to STBY
  2.001  DISP
  2.001  DISP         Disconnect the 100 m[234] resistor from the UUT
  2.001  DISP         and connect UUT to the 5700A in 4-wire configuration
  2.002  5700         1.0000Z                                           S  4W
  2.003  DISP         Set the front panel switch on the UUT to OPR
  2.004  IEEE         [D200][TRIG][I]
  2.005  MEME
  2.006  MEMC   2     Z              0.04% 0.0003U
#!          Test Tol 0.0007, Sys Tol 9.5e-005, TUR 7.368 (>= 4.00).
  3.001  5700         10.000Z                                           S  4W
  3.002  IEEE         [D200][TRIG][I]
  3.003  MEME
  3.004  MEMC   20    Z              0.04% 0.003U
#!          Test Tol 0.007, Sys Tol 0.00028, TUR 25.000 (>= 4.00).
  4.001  5700         100.00Z                                           S  4W
  4.002  IEEE         [D200][TRIG][I]
  4.003  MEME
  4.004  MEMC   200   Z              0.04% 0.03U
#!          Test Tol 0.07, Sys Tol 0.0017, TUR 41.176 (>= 4.00).
  5.001  5700         1.0000kZ                                          S  4W
  5.002  IEEE         [D200][TRIG][I]
  5.003  MEM/         1000
  5.004  MEME
  5.005  MEMC   2     kZ             0.04% 0.0003U
#!          Test Tol 0.7, Sys Tol 0.012, TUR 58.333 (>= 4.00).
  6.001  5700         10.000kZ                                          S  4W
  6.002  IEEE         [D200][TRIG][I]
  6.003  MEM/         1000
  6.004  MEME
  6.005  MEMC   20    kZ             0.05% 0.002U
#!          Test Tol 7, Sys Tol 0.11, TUR 63.636 (>= 4.00).
  7.001  5700         100.00kZ                                          S  4W
  7.002  IEEE         [D200][TRIG][I]
  7.003  MEM/         1000
  7.004  MEME
  7.005  MEMC   200   kZ             0.075% 0.02U
#!          Test Tol 95, Sys Tol 1.3, TUR 73.077 (>= 4.00).
  8.001  5700         *                                                 S
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.